← All posters

Electrical Safety — poster

Electrical & Energy · Safety rules
Electrical Safety

Electricity gives no second chances — 50 milliamps across the chest can stop your heart, and a standard circuit carries 300 times that. Most electrocutions on job sites involve equipment everyone assumed was safe.

1
Treat every wire as live

Test before you touch, every time, with a tester you just verified on a known live source. De-energized isn't proven until it's tested.

2
GFCIs save lives

Ground-fault circuit interrupters cut power in 1/40 of a second. Required for all receptacles on construction sites. No GFCI, no plug-in.

3
Inspect cords daily

Frayed insulation, missing ground pins, tape repairs = out of service. Extension cords are for temporary use — not permanent wiring, not through doorways or water.

4
Keep your distance

10 ft minimum from overhead power lines (more for higher voltage). Ladders, cranes, and scaffold poles have all become electrodes. Look up before you lift.

Full certification online: Electrical Safety for Construction — scan the QR.

buildrightacademy.us