The BuildRight Blog
250 guides and daily briefs on OSHA, tower work and telecom safety. Read the guide, take the course, carry the card.
250
Articles
69
Topics
Daily
Field feed
Certificates are only half the check-in. These are the nine real-world items — from a missing hard hat to an uncalibrated RF monitor — that send fully-certified crews back to the truck.
site access6 min readUpdated Jul 2026
Cited course: Fall Protection Training — $30
EnrollEvergreen — kept current, tied to a course
telecom
TTT-2 isn't a harder version of TTT-1 — it's a different job on paper. What actually changes in your day-to-day responsibility once you hold it, beyond the exam content itself.
6 min read · Updated Sep 2026
rigging
Structure rigging under A10.48 and crane operations under OSHA Subpart CC use two different hand-signal sets. A worker who learned one and assumes it covers the other is a real hazard on a mixed-equipment lift.
6 min read · Updated Sep 2026
telecom
Authorized Climber, Competent Climber, TTT-1, TTT-2, then NWSA's Foreman and specialty certifications — the full ladder, and what each rung actually unlocks on the crew.
6 min read · Updated Sep 2026
rigging
How tension per sling leg climbs as the angle drops below 45° — the load angle factor chart from 90° to 15°, the 2/3/4-leg bridle rule, and a free calculator to run your own numbers.
7 min read · Updated Oct 2026
rigging
The four numbers an A10.48 tower rigging plan is built from — sling tension, block/gin-pole load, capstan pull and anchorage demand — with the real formulas and a free calculator to run them.
8 min read · Updated Oct 2026
rigging
A guided tour of BuildRight’s free rigging calculator — the six stations, what’s free vs what needs a free account, and who it’s built for.
6 min read · Updated Oct 2026
Daily briefs — news dies in a week; the guides above don't
One more reach… 🪜 He stood on the top cap and leaned for the far hanger — the ladder tipped. The top step is not a step.instagram · Oct 26
From dirt to signal in 30 seconds 📡 Excavation → rebar and concrete pour → tower stacked section by section → antenna hoisted on a capstan line with…instagram · Oct 26
What's inside a wind turbine? 🌬️ Foundation, tower, ladder, nacelle, yaw, hub + pitch, blades, sensors — eight parts, one chain.instagram · Oct 25
That counterweight doesn't stop for you. 🏗️⚠️ 1. Tons of steel swing behind the cab 2. The circle is everything the tail can reach 3.instagram · Oct 24Every guide above links the course that certifies the skill. Online, self-paced, built to OSHA standards, accepted on site.
Full catalogMost popular
Qualified Electrical Worker (QEW) — Electrical Safety Compliance Training4.6 · 19 ratings3h online
