48 safety courses. Every one of them in Spanish too.

4.5hIntermediate2-yr certificate

Basic Rigging Principles on Communication Structures

Rigging theory for tower crews: sling types and their tags, hitches and sling angle, rigging hardware, inspection and removal-from-service criteria, the rigging plan and its classes, and load control on the structure. Built to OSHA standards.

$95.00View Course →

Batteries Awareness Training

Lithium and lead-acid batteries power the modern job site — and they can burn it down. Learn to safely store, charge, transport, and dispose of batteries, spot thermal-runaway and acid hazards early, and respond to leaks and fires. Finish job-ready with a certificate you can show on site the same day.

Bloodborne Pathogens (BBP)

One needle stick or blood spill can change everything. This OSHA-aligned Bloodborne Pathogens course teaches you the real exposure risks, how to protect yourself with PPE and safe handling, and exactly what to do after an exposure. Required for many job sites — earn your certificate in about an hour.

$15.00View Course →

1.5hAdvanced2-yr certificate

Capstan Hoist Safety and Operations Training

On a tower, a mishandled hoist line is a dropped load waiting to happen. Master capstan hoist setup, rigging, rope handling, load limits, and inspection so every lift goes up — and comes down — safely. Built for tower climbers and telecom crews who need it done right.

$105.00View Course →

Certified Crane Signal & Safety: Online Hand Signals Training Course

The signal person is the crane operator's eyes. Learn every standard hand signal, clear radio communication, load and swing-path awareness, and the coordination that keeps crews alive around heavy lifts. Become the qualified signaler sites are required to have.

$59.00View Course →

Cold Stress Prevention and Safety

Cold kills slowly, then all at once. Recognize the early signs of hypothermia and frostbite, dress and work to stay safe in freezing conditions, and act fast when a crew member goes down. Essential for anyone working outdoors through winter.

2hIntermediate2-yr certificate

Confined Space Training

This course equips workers and supervisors with the knowledge and skills needed to identify, assess, and safely enter confined spaces in compliance with OSHA standards 29 CFR 1910.146 and 29 CFR 1926 Subpart AA. Learners will explore permit-required confined space hazards, atmospheric testing, entry procedures, role-specific duties, and emergency rescue requirements. Grounded in real-world fatality case studies and OSHA curriculum, this course is designed to reduce serious injuries and deaths associated with confined space operations.

0.5hBeginner2-yr certificate

Control of Hazardous Energies for Construction

Stored energy doesn't care that the switch is off. Learn to identify every energy source on a construction site, isolate and lock it out, release stored pressure, and verify zero energy before anyone puts hands on equipment. Stay protected during every service and repair.

Dropped Objects Prevention for Work at Height

What a falling tool actually does, how tethering and containment stop it, how the zone below is controlled, and how a dropped objects program is built and audited. Written for tower, rooftop and construction crews. Built to OSHA standards.

4.5hIntermediate2-yr certificate

Electric Power Generation, Transmission & Distribution Safety — 29 CFR 1910.269 Awareness

Awareness-level training in 29 CFR 1910.269: scope versus 1926 Subpart V and 1910.268, job briefings, minimum approach distances, arc flash and PPE, de-energizing and grounding, fall protection on poles and lifts, tree trimming, and enclosed spaces. Built to OSHA standards.

$79.00View Course →

Electrical Hazard Recognition

Most electrical injuries happen to people who never saw it coming. Train your eye to spot shock and arc-flash hazards, keep safe approach distances, choose the right PPE, and avoid the mistakes that put workers in the ER. A must for anyone working near energized equipment.

3.5hIntermediate2-yr certificate

Electrical Safety & Arc Flash Training — NFPA 70E® (2027)

Build and work inside an electrical safety program to NFPA 70E: the electrically safe work condition, shock and arc flash risk assessment, approach boundaries, PPE selection, energized work permits, training and program audits. Built to OSHA standards.

$85.00View Course →

Electrical Safety and LOTO for General Industry

Equipment that powers on mid-repair is a leading cause of serious injury. This general-industry course combines electrical safety with lockout/tagout — de-energize, lock, tag, and verify like a pro, fully aligned with OSHA. Work on electrical systems with confidence, not luck.

$49.00View Course →

Electrical Safety for Construction

Construction sites are full of live wires, wet conditions, and temporary power — a dangerous mix. Learn to recognize shock and arc-flash hazards, ground properly, and follow the safe work practices OSHA requires. Protect yourself and your crew on every project.

Entry-Level Tower Technician: What the Job Really Is

Free orientation for anyone thinking about becoming a tower climber or tech: the roles, the tower types, what's actually mounted up there, the real hazards, and exactly which courses get you hired. No cost, no card, rotate our 3D tower models yourself.

$0.00View Course →

3.5hIntermediate2-yr certificate

Excavation and Trenching Safety

This course equips construction workers and site supervisors with the knowledge to recognize, evaluate, and control the serious hazards associated with excavation and trenching operations under OSHA's 29 CFR Part 1926, Subpart P [S1]. From soil classification and protective systems to atmospheric hazards and competent-person responsibilities, learners will gain the practical skills needed to prevent cave-ins and keep every worker who enters a trench safe [S2].

Fall Protection For Construction

Falls are the #1 killer in construction — and nearly all of them are preventable. Learn when protection is required, how to choose and wear a harness, set anchor points and guardrails, and plan a rescue. Get OSHA-compliant and site-ready, fast.

0.5hIntermediate2-yr certificate

Fall Protection Training

Working at height leaves zero room for error. Master the fundamentals of fall protection — trigger heights, personal fall arrest systems, equipment inspection, and safe positioning — so you go home every night. Certificate delivered the moment you pass.

Flagger Safety Awareness

Awareness-level orientation to flagging in short roadside work zones: MUTCD Part 6 basics, the temporary traffic control zone, flagger station and escape route, STOP/SLOW paddle signals, high-visibility apparel, communication between flaggers, night work, and mobile operations. Does not replace a state-required flagger certification or an approved provider's card.

GHS Hazard Communication

Every chemical on site tells you how to handle it — if you can read the label. Decode GHS pictograms, labels, and Safety Data Sheets, and learn to store and use hazardous materials safely under OSHA HazCom. Quick, practical, and required in most workplaces.

6hAdvanced2-yr certificate

Gin Pole Rigging & Tower Erection

Deep-dive training on the tower's own lifting device: reading a gin pole's load chart, setting it on the structure, jumping it up the tower, running an erection sequence around it, and planning the work as the Class IV lift it is under ANSI/ASSP A10.48-2023. Built to OSHA standards.

$149.00View Course →

Ground Fault Protection for Construction

On a damp construction site, a faulty tool can be fatal. Learn how ground faults happen, how GFCIs and the assured equipment grounding program protect you, and what OSHA requires for temporary power. Simple knowledge that prevents electrocution.

4hIntermediate2-yr certificate

Grounding & Bonding for Telecom Sites

Site grounding for tower techs and installers: why sites are grounded, the ring-rod-bar system, coax and RRU grounding kits, exothermic welds vs compression lugs, conductor routing, antenna and mount bonding, inspection, and ground-resistance testing awareness. Training with a certificate of completion, not an electrician license. Built to OSHA standards.

$89.00View Course →

Heat Stress Prevention

Heat stroke can drop a worker in minutes. Learn to recognize heat exhaustion before it turns deadly, build hydration and rest into the workday, and respond fast when someone overheats. Critical training for crews working through the summer.

2hIntermediate2-yr certificate

Heavy Vehicles

Introduction to Mobile Crane Planning

A safe lift is won before the crane ever moves. Learn to read load charts, assess ground conditions, plan setup and swing paths, and control the hazards that cause tip-overs and dropped loads. Plan lifts that pass inspection and protect everyone on site.

$79.00View Course →

JHA/JSA and Pre-Task Planning

Free. Break a job into steps, find the hazard in each one, pick controls that hold, and brief the crew so the plan survives contact with the site. Built to OSHA standards, and it ends with a JSA you can actually hand to a GC.

$0.00View Course →

Lockout Tagout (LOTO) Certification

LOTO is the difference between routine maintenance and a fatal accident. Get certified to control hazardous energy — apply locks and tags, verify zero energy, and keep equipment safely shut down during servicing. One worker, one lock, one life saved.

3.5hIntermediate2-yr certificate

Medium Voltage Safety (1–35 kV) — Qualified Worker Training

Work safely around 1–35 kV. Step and touch potential, arc flash at medium voltage, approach boundaries, test before touch, temporary protective grounding, insulating gloves and live-line tools. Built to OSHA standards.

$95.00View Course →

MEWP Aerial Lift Safety

Scissor lifts and boom lifts put you high in the air on a moving platform — respect them. Learn pre-use inspection, stability and load limits, fall protection, and safe operation that meets ANSI and OSHA standards. Operate any MEWP with confidence.

$59.00View Course →

8hAdvanced2-yr certificate

Heavy Vehicles

Mobile Crane Operator Written Exam Prep

Verified prep for the mobile crane operator written core exam: site layout and setup, crew roles and signals, stability and load weight, load charts with worked examples, and the OSHA 1926 Subpart CC rules a written exam expects you to know — plus a large practice question bank with explanations and a full-length final exam. Independent study material; not affiliated with or endorsed by any certifying body, and completion is not a crane operator certification.

$99.00View Course →

Personal Protective and Lifesaving Equipment

The right gear, worn the right way, is what stands between you and a serious injury. Learn to select, inspect, and use head, eye, hand, and fall protection on construction sites — and know when each is required. OSHA-aligned and built for the field.

Portable Fire Extinguisher Training

Short, practical training on the fire triangle, the five extinguisher classes, reading a label, and PASS technique — plus when to fight a small fire and when to leave. Site-specific notes for shelters, generators, battery/lithium rooms and hot work. Built to OSHA standards.

PPE for Telecommunications

Tower and telecom work demands gear most trades never think about. Learn the head, eye, hand, and fall protection — plus RF-aware equipment — that keeps you safe hundreds of feet up. Inspect, fit, and use it like the pros who climb every day.

3hBeginner2-yr certificate

Qualified Electrical Worker (QEW) — Electrical Safety Compliance Training

Electrical safety training built around NFPA 70E: shock and arc-flash risk assessment, approach boundaries, PPE selection, the electrically safe work condition and energized work permits. Covers what a qualified electrical worker has to know — and who actually designates one.

$99.00View Course →

RF Safety

RF Awareness & Safety Training

RF energy is invisible, silent, and everywhere on a tower — and over the limit, it burns. Learn to read RF exposure zones, respect MPE limits, use monitors and signage, and work safely around live antennas. The certificate carriers and site managers require before you climb.

$49.00View Course →

2.5hBeginner2-yr certificate

Rooftop and DAS Work Awareness

Rooftop telecom work from the ground up: access and permission, fall hazards without a tower, RF from antennas at head height, what else lives on a roof, and working DAS and small cells inside occupied buildings. Built to OSHA standards.

$69.00View Course →

Heavy Vehicles

Safe Forklift Operation for General Industry

Forklifts cause thousands of injuries a year, usually from skipped basics. Learn pre-use inspection, safe load handling, stability and tip-over prevention, pedestrian awareness, and refueling — everything OSHA requires to operate. Get certified and cleared to drive.

1hIntermediate2-yr certificate

Scaffolding Safety in Construction

This course equips construction workers and supervisors with the essential knowledge to recognize, prevent, and control scaffold-related hazards in accordance with OSHA 29 CFR Part 1926 Subpart L. Learners will explore scaffold types, structural requirements, fall and falling-object protection, safe access, and mandatory training obligations to help eliminate the 4,500 injuries and 50 deaths that proper compliance can prevent every year [S5].

Silica Dust Awareness in Construction

This course equips construction workers and supervisors with a thorough understanding of the hazards posed by respirable crystalline silica dust on the jobsite, grounded in OSHA's Respirable Crystalline Silica Standard for Construction (29 CFR 1926.1153). Learners will explore health risks, regulatory requirements, exposure control strategies, and employer obligations—so every worker can return home safe and every site stays compliant.

Slips, Trips and Falls for General and Construction Industry

They sound minor until someone's out for months. Learn to spot the everyday hazards behind slips, trips, and falls, keep walking surfaces and housekeeping under control, and build habits that prevent the most common injuries on any site.

Stairways And Ladders Awareness for Construction

More falls happen on ladders and stairs than almost anywhere else on site. Learn to pick the right ladder, set it up correctly, keep three points of contact, inspect for defects, and meet OSHA requirements. Simple skills that prevent painful falls.

Standard – CPR / AED

Respond to cardiac emergencies with CPR and an AED. Covers chest compressions, rescue breaths, AED use, and the chain of survival for adults.

Standard – CPR / AED / First Aid

Be the person who knows what to do in any emergency. This combined course covers CPR, AED, and first aid — cardiac arrest, choking, severe bleeding, burns, and common injuries — with clear, practical technique. One certificate, total readiness.

Standard – First Aid

Emergencies don't wait for the ambulance. Build the core first-aid skills to control bleeding, treat burns and fractures, manage shock, and stay calm under pressure until help arrives. Practical, confidence-building, and certified.

3hIntermediate2-yr certificate

Supervisor & Foreman Safety Leadership

For the crew member stepping up to run a crew: running a pre-job briefing people actually listen to, using stop-work authority, walking a site for hazards, handling an incident in the first minutes, building a near-miss culture, correcting an unsafe act, supervising a new hire, coordinating subcontractors, the OSHA recordkeeping basics that land on a supervisor's desk, and owning the rescue plan and the weather call. Training and a certificate of completion, not a substitute for your employer's own program.

$55.00View Course →

9hIntermediate2-yr certificate

TTT-1 Exam Prep: Telecommunications Tower Technician 1

A structured, independent preparation course that helps tower technicians understand the public TTT-1 knowledge areas, review core safety concepts, and practice with original scenario-based questions. This is an independent exam preparation course. BuildRight Academy is not affiliated with, sponsored by, or endorsed by the National Wireless Safety Alliance (NWSA). NWSA, TTT-1, and related marks are the property of their respective owners. This course does not provide NWSA certification and does not include actual exam questions.

$120.00View Course →

12hIntermediate2-yr certificate

TTT-2 Exam Prep: Telecommunications Tower Technician 2

Crew-lead level prep for the NWSA TTT-2 exam: rescue plans, anchorage and RF decisions, rigging classes, sling angles, hoist selection and personnel hoisting, condition assessments, FAA lighting. 42 lessons, a numbers drill and a full 100-question practice exam. This is an independent exam preparation course. BuildRight Academy is not affiliated with, sponsored by, or endorsed by the National Wireless Safety Alliance (NWSA). NWSA, TTT-2, and related marks are the property of their respective owners. This course does not provide NWSA certification and does not include actual exam questions.

$150.00View Course →

Working Safely with Electricity for Construction

Electricity is unforgiving on a construction site — one wrong move and there's no second chance. Learn to recognize shock and arc-flash hazards, keep safe distances, ground correctly, and follow OSHA-aligned safe work practices. Work near power with real confidence.