The BuildRight Blog
146 guides and daily briefs on OSHA, tower work and telecom safety. Read the guide, take the course, carry the card.
146
Articles
69
Topics
Daily
Field feed
146 articles
telecom
TTT-2 isn't a harder version of TTT-1 — it's a different job on paper. What actually changes in your day-to-day responsibility once you hold it, beyond the exam content itself.
6 min read · Updated Sep 2026
rigging
Structure rigging under A10.48 and crane operations under OSHA Subpart CC use two different hand-signal sets. A worker who learned one and assumes it covers the other is a real hazard on a mixed-equipment lift.
6 min read · Updated Sep 2026
telecom
Authorized Climber, Competent Climber, TTT-1, TTT-2, then NWSA's Foreman and specialty certifications — the full ladder, and what each rung actually unlocks on the crew.
6 min read · Updated Sep 2026
rigging
How tension per sling leg climbs as the angle drops below 45° — the load angle factor chart from 90° to 15°, the 2/3/4-leg bridle rule, and a free calculator to run your own numbers.
7 min read · Updated Oct 2026
rigging
The four numbers an A10.48 tower rigging plan is built from — sling tension, block/gin-pole load, capstan pull and anchorage demand — with the real formulas and a free calculator to run them.
8 min read · Updated Oct 2026
rigging
A guided tour of BuildRight’s free rigging calculator — the six stations, what’s free vs what needs a free account, and who it’s built for.
6 min read · Updated Oct 2026
telecom
NWSA gives no grace period on TTT-1 or TTT-2. Miss your five-year window and you're back to the full exam and fee. Exactly when to start, and what recertifying requires.
6 min read · Updated Sep 2026
OSHA
Bloodborne pathogens training is required for anyone with "occupational exposure" to blood or OPIM — not just healthcare workers. Here is who that covers, what OSHA requires, and how it differs from a first-aid card.
5 min read · Updated Oct 2026
Electrical
Medium voltage work (1–35 kV) changes step/touch potential, arc flash energy, and approach boundaries compared to standard electrical work. Here is who OSHA and NFPA 70E require to be trained, and what changes.
5 min read · Updated Oct 2026
Español
OSHA 1910.269 y NFPA 70E exigen capacitación específica para trabajar cerca de media tensión (1–35 kV) — aquí está quién la necesita y qué cambia respecto a la baja tensión.
5 min read · Updated Oct 2026
Español
Las normas ANSI A92 y OSHA exigen capacitación específica para operar plataformas elevadoras de tijera o articuladas. Aquí está qué exige, y en qué se diferencian los dos tipos.
5 min read · Updated Oct 2026
rigging
A gin pole is not a crane — it is a lifting device mounted on the tower itself, used to erect, extend and dismantle sections from above. Here is how it actually works.
5 min read · Updated Oct 2026
One more reach… 🪜 He stood on the top cap and leaned for the far hanger — the ladder tipped. The top step is not a step.instagram · Oct 26
From dirt to signal in 30 seconds 📡 Excavation → rebar and concrete pour → tower stacked section by section → antenna hoisted on a capstan line with…instagram · Oct 26
What's inside a wind turbine? 🌬️ Foundation, tower, ladder, nacelle, yaw, hub + pitch, blades, sensors — eight parts, one chain.instagram · Oct 25
That counterweight doesn't stop for you. 🏗️⚠️ 1. Tons of steel swing behind the cab 2. The circle is everything the tail can reach 3.instagram · Oct 24
