The BuildRight Blog
74 guides and daily briefs on OSHA, tower work and telecom safety. Read the guide, take the course, carry the card.
74
Articles
69
Topics
Daily
Field feed
74 articles
rigging
A gin pole is not a crane — it is a lifting device mounted on the tower itself, used to erect, extend and dismantle sections from above. Here is how it actually works.
5 min read · Updated Oct 2026
grounding
Grounding and bonding get used interchangeably on job sites, but they do different jobs. Here is the actual difference, and why a telecom site needs both done right.
6 min read · Updated Oct 2026
telecom
TTT-2 is a $274 NWSA exam: 100 multiple-choice questions in 2 hours, online with a live proctor. The one hard prerequisite is an active TTT-1. Here's the full process and what it actually certifies.
6 min read · Updated Sep 2026
rigging
OSHA does not issue a "qualified rigger" card — it defines the term by demonstrated knowledge and skill under 29 CFR 1926.1401/.753. Here is what actually qualifies someone, and what does not.
6 min read · Updated Oct 2026
rigging
Rigger classes vary wildly in what they actually teach. Here is the curriculum OSHA 1926.1401 implies a real rigger training course should cover — and where signal person training fits in.
6 min read · Updated Oct 2026
construction safety
There is no single OSHA line that says "tether your tools" — but the general duty clause plus PPE and fall protection rules add up to the same requirement in practice. Here is how it actually works.
5 min read · Updated Oct 2026
construction safety
A tethered tool is equipment. A dropped objects prevention program is equipment plus documentation, inspection and near-miss tracking an auditor can actually check. Here is the checklist.
5 min read · Updated Oct 2026
fall protection
A rooftop antenna site rarely feels like "height" the way a tower does — but OSHA's fall protection trigger doesn't care how it feels. Here is when 1926.501 actually applies on a roof.
5 min read · Updated Oct 2026
telecom
DAS stands for Distributed Antenna System — a network of small antennas spread through a building or venue instead of one big tower. The work, and the hazards, are genuinely different.
5 min read · Updated Oct 2026
rigging
NATE's Rigging Training Standard is a recommended training curriculum for employers, not an exam and not a NATE credential. What its five parts cover, and what your own program needs to document to follow it.
7 min read · Updated Sep 2026
telecom
No OSHA regulation names TTT-1 by name. But carrier and GC site-access rules do — and that gap between the law and the gate is exactly what turns crews away. Here's what's actually required, and by whom.
6 min read · Updated Sep 2026
telecom
TTT-1 certifies a technician who works under direct supervision. TTT-2 certifies one who can supervise TTT-1 techs and trainees — and you must hold TTT-1 first. Here's every difference, side by side.
7 min read · Updated Sep 2026
One more reach… 🪜 He stood on the top cap and leaned for the far hanger — the ladder tipped. The top step is not a step.instagram · Oct 26
From dirt to signal in 30 seconds 📡 Excavation → rebar and concrete pour → tower stacked section by section → antenna hoisted on a capstan line with…instagram · Oct 26
What's inside a wind turbine? 🌬️ Foundation, tower, ladder, nacelle, yaw, hub + pitch, blades, sensors — eight parts, one chain.instagram · Oct 25
That counterweight doesn't stop for you. 🏗️⚠️ 1. Tons of steel swing behind the cab 2. The circle is everything the tail can reach 3.instagram · Oct 24
